Real-time picosecond measurements of electronic energy transfer from DODCI to malachite green and DQOCI

Singlet-singlet resonance energy transfers from DODCI (donor) to malachite green and to DQOCI in ethanolic solutions have been investigated with a real-time picosecond streak-camera (time-resolution 3–5 ps) operating at a repetition rate of 140 MHz, in synchronism with the pulse train from a mode-locked cw dye laser used as excitation source. Acceptor concentrations from 10^?5 M to 7.5 × 10^?3 M were studied and average R_o values of 45.6 Å for malachite green and 61.8 Å for DQOCI are obtained from the directly measured fluorescence decay curves. Departure from Förster kinetics is seen at the lower acceptor concentrations employed.     

Polymer-additive extraction via pressurized fluids and organic solvents of variously cross-linked poly(methylmethacrylates)

Variously cross-linked poly(methylmethacrylates) (PMMAs) are synthesized with three additives incorporated at theoretically 1000 microg of the additive per gram of prepared polymer. The additives are Irganox 1010, Irganox 1076, and Irgafos 168. The in-house" synthesized polyacrylates are then subjected to supercritical fluid extraction (SFE) to determine if additive recovery is a function of percent cross-linking. Although considerable work in this regard has been performed with non-cross-linked polyolefins, the literature is lacking regarding polyacrylates. Some additive degradation apparently occurs during the synthesis, as judged by the increased complexity of the extract high-performance liquid chromatographic trace and the low percent recoveries observed especially for the Irganoxes. For low polymer cross-linking (1%), it appears that both PMMA synthetic reproducibility and readily observed polymer swelling during SFE are serious issues that adversely affect additive percent recovery and precision of results. Higher percent cross-linking yields more consistent analytical data than low percent cross-linking, even though the amount of additive extracted in all PMMA samples (regardless of cross-linking percentage) is essentially the same whether the extraction is via SFE or liquid-solid extraction with methylene chloride. Results for comparably cross-linked poly(ethylmethacrylate) and poly(butylmethacrylate) are similar to PMMA.     

60]- and [70]Fullerenes are trifluoromethylated across 5:6-bonds

Trifluoromethylation of [60]- and [70]fullerenes occurs across both 6:6- and 5:6-bonds giving unsymmetrical tetramethyl adducts having four contiguous CF3 groups; both fullerenes give bis adducts which do not involve 6:6-addition, and unsymmetrical hexa-adducts (with contiguous CF3 groups) are also obtained from [60]fullerene.     

Highly enantioselective catalytic acyl-pictet-spengler reactions

The enantioselective cyclization of N-acyliminium ions generated in situ from tryptamine is promoted with high enantioselectivity by a new chiral thiourea catalyst. This represents the first successful system for asymmetric catalysis of the Pictet-Spengler reaction.     

Toward a total synthesis of peloruside A: enantioselective preparation of the C8-C19 region

An efficient synthetic sequence toward the C8-C19 region of peloruside A has been developed. The route is highlighted by a selective electrophilic cyclization reaction, a single-step epoxide ring-opening/methylation sequence, and a stereoselective Mukaiyama aldol reaction. [reaction: see text]     

Characterization of a glow discharge plasma as a function of sampling orifice potential

Plasma diagnostic studies have been carried out on the discharge source of a commercial glow discharge quadrupole mass spectrometer. Plasma parameters were determined using an electrostatic probe with the objective of determining the dependence (if any) of these parameters on the voltage placed on an auxiliary electrode immersed in the plasma. The biased electrode utilized in this study was the sampling orifice element itself. Our results indicate that, for positive orifice voltages with respect to the grounded anode, variations in the plasma potential and ion energy can be correlated directly to the bias placed on the sampling orifice. The dependence of the electron temperature on this parameter is observed to be more complex in nature, and electron number densities show little significant variation with respect to sampling orifice bias. In addition, increased orifice voltages result in an increase in the ion signal intensity measured with the mass spectrometer. Based on the results obtained here, we feel that this increase is due primarily to an increase in ion transmission to the quadrupole arising from the increased ion energy.     

Design, synthesis, and binding affinities of pyrrolinone-based somatostatin mimetics

[structure: see text] Tetrapyrrolinone somatostatin (SRIF) mimetics (cf. 1), based on a heterochiral (D,L-mixed) pyrrolinone scaffold, were designed, synthesized, and evaluated for biological activity. The iterative synthetic sequence, incorporating the requisite functionalized coded and noncoded amino acid side chains, comprised a longest linear synthetic sequence of 23 steps. Binding affinities at two somatostatin receptor subtypes (hsst 4 and 5) reveal micromolar activity, demonstrating that the d,l-mixed pyrrolinone scaffold can be employed to generate functional mimetics of peptide beta-turns.     

Structural basis for recognition of bacterial cell wall teichoic acid by pseudo-symmetric SH3b-like repeats of a viral peptidoglycan hydrolase

Endolysins are bacteriophage-encoded peptidoglycan hydrolases targeting the cell wall of host bacteria via their cell wall-binding domains (CBDs). The molecular basis for selective recognition of surface carbohydrate ligands by CBDs remains elusive. Here, we describe, in atomic detail, the interaction between the Listeria phage endolysin domain CBD500 and its cell wall teichoic acid (WTA) ligands. We show that 3′O-acetylated GlcNAc residues integrated into the WTA polymer chain are the key epitope recognized by a CBD binding cavity located at the interface of tandem copies of beta-barrel, pseudo-symmetric SH3b-like repeats. This cavity consists of multiple aromatic residues making extensive interactions with two GlcNAc acetyl groups via hydrogen bonds and van der Waals contacts, while permitting the docking of the diastereomorphic ligands. Our multidisciplinary approach tackled an extremely challenging protein–glycopolymer complex and delineated a previously unknown recognition mechanism by which a phage endolysin specifically recognizes and targets WTA, suggesting an adaptable model for regulation of endolysin specificity.

Combining genetic, biochemical and computational approaches, we elucidated the molecular mechanisms underlying the recognition of Listeria wall teichoic acid by bacteriophage-encoded SH3b repeats.     

Contribution to the certification of B,Cd, Cu,Mg and Pb in a synthetic water sample,by use of isotope-dilution ICP-MS,for Comparison 12 of the International Measurement Evaluation Programme

The contribution of the Institute for Reference Materials and Measurements to the certification of the B, Cd, Cu, Mg, and Pb content of a synthetic water sample used in Comparison 12 of the International Measurement Evaluation Programme (IMEP-12) is described. The aim of the IMEP programme is to demonstrate objectively the degree of equivalence and quality of chemical measurements of individual laboratories on the international scene by comparing them with reference ranges traceable to the SI (Système International d'Unités). IMEP is organized in support of European Union policies and helps to improve the traceability of values produced by field chemical measurement laboratories. The analytical procedure used to establish the reference values for the B, Cd, Cu, Mg, and Pb content of the IMEP-12 sample is based on inductively coupled plasma-isotope-dilution mass spectrometry (ICP-IDMS) applied as a primary method of measurement. The measurements performed for the IMEP-12 study are described in detail. Focus is on the element boron, which is particularly difficult to analyze by ICP-MS because of potential problems of low sensitivity, high mass discrimination, memory effects, and abundance sensitivity. For each of the certified amount contents presented here a total uncertainty budget was calculated using the method of propagation of uncertainties according to ISO (International Organization for Standardization) and Eurachem guidelines. For all investigated elements with concentrations in the low micro g kg(-1) and mg kg(-1) range (corresponding to pmol kg(-1) to the high micro mol kg(-1) level), SI-traceable reference values with relative expanded uncertainties ( k=2) of less than 2 % were obtained.     

Molecular dynamics study of gas hydrate formation

Long-time-scale molecular dynamics simulations are presented of the spontaneous formation of methane hydrate at a methane/liquid water interface. The water film was prepared at 300 K, 30 bar and showed no significant hydrate order. On crash cooling to 250 K, 300 bar (about 20 K subcooling), the system showed a rapid growth of hydrate clusters. Contrary to popular models for hydrate nucleation, the clusters formed first as two-dimensional arrangements and only later into three-dimensional cage structures; the results are, however, consistent with the local order model proposed recently. The hydrate clusters showed clear signatures of the type II hydrate structure even though the type I structure is the thermodynamically stable form for methane hydrate; this is in accord with the results of recent diffraction experiments.